[情報] NZXT H1 Case 安全問題警示,下架/招回?

PC購物

28211

目前歐美正在過火雞節的當下,美商恩傑發表了NZXT所附的PCIE延長線
固定在PCB上的螺絲可能產生火花燒機,並提出了寄送維修套件(螺絲)
的解決辦法,目前的建議是即刻關機直到收到維修套件為止,目前還在
跟美國消費品安全委員會(CSPC)討論下一步作法是什麼

在此呼籲有用NZXT的鄉民趕快關機啊,雖然目前只有少於10台發生的案例
目前原價屋還是有上架,還在組裝的鄉民趕快停止啊,不知道Youtuber
網紅們甚麼時候會出來呼籲安全?都燒機了竟然還沒全面招回換機或維修?

以下新聞來源https://blog.nzxt.com/details-on-h1-case-safety-issue/

WHAT’S GOING ON?
We’ve identified an issue with the H1 case where a short on the PCIe riser
cable connection can lead to a potential safety hazard. This issue has
currently affected fewer than ten H1 cases.

To be extra cautious, we have paused sales on NZXT & NZXT BLD and asked
resellers to temporarily pause sales as well while our engineering team is
confirming the issue and preparing a solution.

WHAT IS THE PROBLEM?
We have identified that the two screws that attach the PCIe Riser assembly to
the chassis may cause an electrical short circuit in the printed circuit
board (PCB). Repair kits are being prepared that include two new screws that
address the issue along with instructions to replace them at home.

WHAT CAN CUSTOMERS DO?
While we have identified this issue as an extremely rare occurrence, the
absolute safest approach is to power-down your H1 until a kit is sent out to
you and the repair is made.

We will be taking customer information and providing early repair kits as
soon as this upcoming week. These kits will allow users to make the repair at
home by replacing both screws that attach the PCIe assembly to the case.
Customers can reach out through our H1 dedicated contact channels included
below for more information.

WHAT ELSE DO CUSTOMERS NEED TO KNOW?
We are working closely with the US Consumer Products Safety Commission (CPSC)
and the proper global authorities to ensure that we are doing everything we
can to help NZXT customers. The CPSC’s function is to help people use
products safely and we have been adhering to their strongly recommended
schedule for releasing information to our suppliers and to the public. We
take this issue seriously and are working as quickly as we can to address it.

HOW DO CUSTOMERS GET IN TOUCH IF THEY HAVE ANY OTHER QUESTIONS?
We appreciate everyone’s patience. For direct contact, customers can contact
our Customer Support team via the provided number and email address.

Please direct inquiries regarding the H1 Issue to:
Phone: 1-888-965-5520 (Mon – Fri, 8am – 6pm PST)
Email: [email protected]

--
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 114.33.136.150 (臺灣) ※ 文章網址: https://www.ptt.cc/bbs/PC_Shopping/M.1606626627.A.32F.html
nk9503571樓看成火花雕雞 好吃 11/29 13:11
DsLove7102樓想吃kiara 11/29 13:14
MK473樓這麼酷炫的嗎?好神奇的燒機方式 11/29 13:16
avans4樓 11/29 13:23
ronald2795樓火了(物理 11/29 13:25
avans6樓好像是上面那個? PCIe riser 11/29 13:25
LoveShibeInu7樓剛看到 正要翻的說哈哈哈 11/29 13:25
JapaZPa48678樓燒機怎麼讓螺絲產生火花? 11/29 13:25
本人9樓電線走火啦,物理性燒機發爐 11/29 13:27
LoveShibeInu10樓原文是說 pcie延長線上有兩個螺絲會造成pcie延長線 11/29 13:27
LoveShibeInu11樓的pcb短路 11/29 13:27
本人12樓Gamernexus有找到熱心的民眾,之後應該會有影片詳 11/29 13:35
本人13樓細解說 11/29 13:35
CHENXOX14樓價崩 11/29 13:35
wellzx15樓慘 我也有一台,雖然不常用就是了 11/29 13:41
ghour16樓感謝 11/29 13:42
ericinttu17樓物理燒機 給推 11/29 14:05
labiron18樓XD熱心民眾 11/29 14:10
labiron19樓物理上的熱心嗎 11/29 14:10
a060715220樓出那麼大的事該打折賣了吧 11/29 14:26
WeAntiTVBS21樓固定在PCB上的螺絲部分 用紅紙板華司絕緣就有機會 11/29 14:33
WeAntiTVBS22樓解決了吧(! 11/29 14:33
WeAntiTVBS23樓紅紙板華司=以前教過鎖主機板螺絲下面要墊這個 11/29 14:34
a137924樓樓上說的那個好久沒看過了 11/29 14:45
ex87625樓多買幾台放雞進去,可以開店了 11/29 14:56
maplefoxs26樓GG 11/29 16:27
simon97827樓H1營火 11/29 16:29
JoyRex28樓MB那鎖腳架金屬接點到底是接地用還是要用墊片絕緣? 11/29 16:48
Severine29樓以前記得MB都用墊片絕緣 11/29 17:56
JungSooYeon30樓講的好像一臉你就是買H1的受害者 11/29 18:26